Skip to content

RESISTANCE_TO_TEMPERATURE

The RESISTANCE_TO_TEMPERATURE node converts resistance to temperature. The resistance should be a reading from a thermistor in Ohms. Params: unit : select Which unit of temperature to return. Returns: out : Scalar The resulting temperature.
Python Code
from typing import Literal
from flojoy import Scalar, flojoy
from numpy import log


@flojoy
def RESISTANCE_TO_TEMPERATURE(
    default: Scalar,
    unit: Literal["K", "C", "F"] = "K",
    nominal_resistance: float = 1e4,
    nominal_temperature: float = 298.15,
    beta_coefficient: float = 3950,
) -> Scalar:
    """The RESISTANCE_TO_TEMPERATURE node converts resistance to temperature.

    The resistance should be a reading from a thermistor in Ohms.

    Parameters
    ----------
    unit: select
        Which unit of temperature to return.

    Returns
    -------
    Scalar
        The resulting temperature.
    """

    steinhart = log(default.c / nominal_resistance)  # X = ln(R/Ro)
    steinhart /= beta_coefficient  # X / B
    steinhart += 1.0 / (nominal_temperature)  # X + (1/To)
    kelvin = 1.0 / steinhart  # 1 / X
    celsius = kelvin - 273.15
    fahren = celsius * 9 / 5 + 32

    match unit:
        case "K":
            c = kelvin
        case "C":
            c = celsius
        case "F":
            c = fahren

    return Scalar(c=c)

Find this Flojoy Block on GitHub

Example

Having problems with this example app? Join our Discord community and we will help you out!
React Flow mini map

In this example, two measurements are extracted from an Arduino and plotted.

Here is a list of nodes to add:

  • OPEN_SERIAL
  • SINGLE_MEASUREMENT_SERIAL x2
  • VECTOR_INDEXING x4
  • LINE x2
  • RESISTANCE_TO_TEMPERATURE x2
  • APPEND x2
  • FEEDBACK x2
  • LOOP

Connect the nodes as seen in the example. Next set the number of loops to zero with the LOOP node parameters. Connect the 3 serial nodes to the desired serial device in the node parameters.

The SINGLE_MEASUREMENT_SERIAL should be returning two seperate measurements in the form of a Vector. Therefore, the VECTOR_INDEXING nodes should be set to 0 and 1 to extract the first and second measurements respectively (light intensity and temperature (in resistance)).

The RESISTANCE_TO_TEMPERATURE nodes convert the resistance of the thermistor to temperature.

The Arduino code used is:

#define THERMISTORPIN A2
#define lightsensor A0
#define THERMISTORNOMINAL 10000
#define SERIESRESISTOR 10000
void setup(void) {
Serial.begin(9600);
}
void loop(void) {
uint8_t i;
float reading;
// convert the value to resistance
reading = analogRead(THERMISTORPIN);
reading = 1023 / reading - 1;
reading = SERIESRESISTOR / reading;
Serial.print(analogRead(lightsensor));
Serial.print(",");
Serial.println(reading);
delay(40);
}